Dog Bone Lifting Anchors

PRODUCT PARAMETERS

  • Material: 45# forged steel
  • Load class: 1.3–32 t
  • Length: 80–260 mm
  • Finish: Hot-dip galvanized
  • Compatibility: WelSteel lifting clutches and common European patterns
  • Application: Precast wall panels, beams, columns, stairs, tunnel segments
  • Feature: Concealed lifting point, recessed after use
  • Service: OEM/ODM, custom lengths
pcs
Description
Request a quote
FAQ

Description

Dog bone lifting anchors (also called double-head lifting pins) are forged steel anchors with a double-head profile. The lower head is cast into the concrete; the upper head engages a lifting clutch, allowing the panel to be lifted, turned and released without leaving a protruding lifting eye.

The anchor is forged from 45# steel, heat-treated and hot-dip galvanized. The head profile is matched to common clutch sizes. Typical applications include wall panels, beams, columns, stairs and tunnel segments.

Product Parameters

Model Load class* (t) Shaft Ø (mm) Head Ø (mm) Length L (mm) Weight (kg) Matching clutch
DBA-1.3 1.3 16 24 80 0.30 LC-1.3
DBA-2.5 2.5 20 30 100 0.55 LC-2.5
DBA-5 5 26 38 130 1.00 LC-5
DBA-10 10 34 48 170 1.90 LC-10
DBA-20 20 45 62 220 3.40 LC-20
DBA-32 32 55 76 260 5.40 LC-32

* Load class referenced to C30/40 concrete, safety factor 2.5; final capacity depends on concrete strength, embedment, edge distance and load angle.

Key Features

  • Clutch-compatible head, matched to WelSteel lifting clutches and common European patterns.
  • Recessed after use: no protruding parts; the recess is filled with grout or a plastic plug.
  • Forged, not cast: continuous grain flow for toughness under impact.
  • Hot-dip galvanized for yard storage and transport.
  • 1.3–32 t range covers panels, beams and heavy segments.

Applications

  • Precast wall panels and façade elements
  • Beams, columns and stairs
  • Tunnel segments and box culverts
  • Heavy precast units requiring repeated handling

Installation & Quality Control

  1. Fix the anchor to the formwork; keep it perpendicular to the lifting direction.
  2. Ensure the specified embedment and edge distance; add reinforcement if required by the lifting plan.
  3. Fit a rubber cap or plastic plug to form the recess.
  4. Match the clutch to the anchor load class; never use a clutch of lower class.
  5. Inspect the head for wear before each lift; replace if deformed.

FAQ

Q: What is the difference between a dog bone anchor and a lifting eye anchor?
A: A dog bone anchor is engaged by a lifting clutch and leaves no protruding eye; a lifting eye anchor has a permanent eye head above the concrete.

Q: Can I use a dog bone anchor for multiple lifts?
A: The anchor can be reused if undamaged, but the clutch and head must be inspected before each lift.

Q: Do you supply the matching clutch?
A: Yes, see Lifting Clutches; specify the anchor load class when ordering.

REQUEST A QUOTE

Contact Info