Curved Pin Anchor

PRODUCT PARAMETERS

  • Material: Q345B carbon steel
  • Load class: 1.3–10 t
  • Length: 227–664 mm
  • Head Ø: 19–46 mm
  • Finish: Black or galvanized
  • Application: Thin panels, edge lifting, precast walls
pcs
Description
Request a quote
FAQ

Description

The curved pin anchor has a bent shaft that follows the reinforcement in thin panels and edge zones. It provides a reliable lifting point where a straight pin would not develop enough embedment or would clash with mesh.

Product Parameters

Model SWL (t) Length (mm) Head Ø (mm) Base Ø (mm)
WS-CPA-13 1.3 227 19 25
WS-CPA-25 2.5 268 26 35
WS-CPA-50 5.0 440 36 50
WS-CPA-75 7.5 664 46 60
WS-CPA-100 10.0 664 46 70

* SWL for C30/40 concrete with proper embedment; verify with the project lifting plan.

Key Features

  • Bent shaft suits thin panels and edge zones
  • Long embedment length for reliable anchorage
  • Head geometry compatible with standard pin clutches
  • Custom bend radius and length on request

Applications

  • Thin precast wall panels
  • Edge lifting of architectural concrete
  • Balconies and parapets
  • Precast elements with congested reinforcement

FAQ

Q: When should I use a curved pin anchor?
A: When the panel is thin or the lifting point is close to an edge and a straight pin cannot develop enough embedment.

Q: Can the bend radius be customized?
A: Yes, bend radius, leg lengths and overall length can be produced to drawings.

Q: Is it reusable?
A: The anchor remains in the concrete; the clutch is removed and reused.

REQUEST A QUOTE

Contact Info