Flat-End Fixing Sockets

PRODUCT PARAMETERS

  • Material: 45# carbon steel (304/316 stainless on request)
  • Thread: M12–M30 metric coarse
  • Length: 70–140 mm
  • Finish: Zinc plated; hot-dip galvanized on request
  • Application: Fair-faced precast, balustrades, cladding brackets
  • Feature: Flush end for a minimal reveal on architectural concrete
  • Standard: GB/T 699, ISO 1461
  • Service: OEM/ODM, custom lengths
pcs
Description
Request a quote
FAQ

Description

Flat-end fixing sockets have a flush end that sits level with the concrete surface, leaving a clean, minimal reveal on fair-faced panels. They are used for fixing balustrades, cladding brackets, lifting aids and temporary works where a protruding collar is not acceptable.

The socket is machined from 45# steel with a rolled internal thread and a flat end plate. A plastic cap seals the thread during pouring.

Product Parameters

Model Thread (M) Sleeve OD (mm) Length L (mm) Recommended tension* (kN) Tightening torque (N·m)
FEF-M12 M12 26 70 18 35
FEF-M16 M16 32 85 30 70
FEF-M20 M20 38 100 45 120
FEF-M24 M24 45 120 60 180
FEF-M30 M30 55 140 90 300

* Recommended working tension for C25/30 concrete with standard embedment; verify by pull-out test.

Key Features

  • Flush finish: no protruding collar on fair-faced concrete.
  • Shorter body than a standard fixing insert for thin panels.
  • Sealed thread with a plastic cap; colour-matched caps available.
  • Zinc plating or hot-dip galvanizing; stainless on request.
  • M12–M30 sizes for balustrades, cladding and temporary works.

Applications

  • Fair-faced architectural precast
  • Balustrade and handrail fixing
  • Cladding and stone bracket fixing
  • Temporary lifting and fixing points

Installation & Quality Control

  1. Fix the flat end tight to the formwork; any gap will show as a recess.
  2. Check perpendicularity before pouring.
  3. Remove the cap and clean the thread before connection.
  4. Do not over-torque; use the table values.

FAQ

Q: Is the flat-end socket stronger than a cross-pin insert?
A: Not necessarily. The cross pin provides better anti-rotation and pull-out; the flat-end socket is chosen for appearance and thin panels.

Q: Can it be used with a swivel eye bolt for lifting?
A: Yes, if the socket and eye are matched and the SWL is verified. For repeated lifting, prefer a dedicated lifting socket.

Q: Do you supply stainless?
A: Yes, 304/316 stainless steel is available on request.

REQUEST A QUOTE

Contact Info